首页 产品 产品详情

核级电缆HBKPKSi-B3 2X6AWG+4X10AWG

  • 2024-09-18
  • 中国
  • 核电站用非1E级,镀锡铜导体,交联聚烯烃双层绝缘,低烟无卤阻燃型软电线 Class 5 tinned copper conductor, cross-linked polyolefin double layer insulated, low-smoking, halogen-free wire of non class 1E grade for nuclear power plant
    更多

产品特性Properties

1  电线额定电压: 0.6/1kV。

Rated voltage:0.6/1kV。

2  电线导体的长期允许工作温度:90℃。

The permitted long-term working temperature of conductor: 90℃.

3  电线的敷设推荐允许弯曲半径:应不小于电线外径的6倍。

The permitted bending radius of cable is no less than 6 times of the overall diameter of the cable .

4  电线的最低使用环境温度:-35℃。(环境温度可以根据顾客的要求)

The Min. environmental temperature:-35℃. (Ambient temperature can be due to customer demand)

5  电线的最低敷设温度:0℃。低于最低敷设温度时应预先加热。

Min. laying temperature of the cable is 0℃. The cable should be pre-heated if it is below the Min. laying temperature

6  电缆的燃烧特性Combustibility

6.1 电线应能通过GB/T 18380.12( IEC 60332-1-2)规定的单根垂直燃烧试验。

The insulated core can pass the test according to GB/T 18380.12(IEC60332-1): Test method on electric wires or cables under fire conditions.

7  电线应能符合GB/T 17651(IEC 61034)规定的烟浓度试验要求。

The cable can comply with he test according to GB/T 17651(IEC 61034):Test method on electric wires or cables under fire conditions.

8  电线的绝缘料按GB/T 17650(IEC 60754-2)标准规定进行测试,pH值不小于4.3,电导率不大于10s/mm。

Insulation material and sheath material of the cable should be tested as per GB/T 17650(IEC 60754-2), which pH is no less than 4.3, and conductivity should be less than 10s/mm.

9 电线的电气性能Electrical properties:

9.1  电线试验电压:AC 3500V/5min不击穿。

       It can withstand AC 3500V/5min.

常州八益电缆股份有限公司 江苏省 常州市
  • 江苏常州新北区电子科技产业园科技大道18号
  • 中国
  • 13961215736
  • +86 519 85480185
  • rkj@81cable.com
进入供应商主页
该供应商其他产品 更多>