JWT-4100R/Z Precision Digital Temperature Meter - Product

Input: 2/3/4-wire PT100, tungsten-rhenium/B/S/N/K/J/T/E thermocouple, 4~20mA, 0~10V, 2~10V, 0~5V, 1~5V.

Output: 6-digit LED display, 4~20mA current range can be set arbitrarily, 0~10V voltage range can be set arbitrarily, relay switch quantity, RS485

Data update rate: thermocouple -1.2s PT100 -1s 4~20mA/0~10V-0.5s

Thermocouple cold end compensation accuracy (AT25℃): (maximum) ±0.05℃

Operating environment: -10~60℃ 0~90% relative humidity without condensation

Special function: Can be matched with the sensor to achieve ultra-high precision measurement. When thermocouple input, four-wire PT100 can be connected externally

Power supply: 220VAC/24VDC

Accuracy (AT25℃ Max):

Enter model number	Range (℃)	Measurement accuracy	Impact of environment change of 1 ℃ (temperature drift)
4-wire system PT100	-200 ~ 500	±0.02 ℃	0.003 ℃
3-wire system PT100	-200 ~ 500	±0.05 ℃	0.003 ℃
2-wire system PT100	-200 ~ 500	±0.05 ℃	0.003 ℃
B-Type thermocouple	300 ~ 1820	±1.20 ℃	0.036 ℃
S-type thermocouple	0 ~ 1768	±0.60 ℃	0.029 ℃
N-type thermocouple	-200 ~ 1300	±0.32 ℃	0.025 ℃
K-type thermocouple	-180 ~ 1372	±0.22 ℃	0.024 ℃
J-type thermocouple	-180 ~ 760	±0.18 ℃	0.008 ℃
T-Type thermocouple	-200 ~ 400	±0.18 ℃	0.011 ℃
E-type thermocouple	-50 ~ 1000	±0.15 ℃	0.007 ℃

Note 1: Total digital accuracy of thermocouple measurement: analog/digital conversion accuracy +0.05℃ (cold end compensation accuracy)

Overall accuracy after using sensor matching function (transmitter + sensor)

Enter model number	Range (℃)	A/D conversion accuracy (℃)
PT100	-50 ~ 200	± 0.02
S-type thermocouple	0 ~ 650	± 0.70
S-type thermocouple	650 ~ 1100	± 1.50
N-type thermocouple	0 ~ 650	± 0.40
N-type thermocouple	650 ~ 1100	± 1.90
T-Type thermocouple	-200 ~ -70	± 0.40
T-Type thermocouple	-70 ~ 400	± 0.20

Note 1: The sensors listed in the table are the most commonly used, stable and representative sensors in each temperature range. For details of accuracy in a wider temperature range, please consult the manufacturer.

Note 2: The thermocouple matching function is a patented technology and must be completed before leaving the factory.

Note 3: The accuracy of thermocouples in the table includes the accuracy of cold junction compensation and does not need to be superimposed separately.