flat deburringFB 384

Configuration of the planetary deburring system FB 384: Workpiece width and any length: 150mm , 300 mm Special up to 500 mm width Workpiece hight 80 mm optional more Planetary deburring head with 4 brushes: Independant ro......Configuration of the planetary deburring system FB 384: Workpiece width and any length: 150mm , 300 mm Special up to 500 mm width Workpiece hight 80 mm optional more Planetary deburring head with 4 brushes: Independant rotation and direction of the brushes and the brushing head. Frequency controlled rotations for planet and brush Workpiece transport by special belt conveyor Magnet table for increased part holding force Demagnitizing table at the exit of the machine Integration in automatic processing lines with conveyors to and away from the machine. Optional return conveyors with part turning 180° to brush both surfaces before the part is unloaded Sensor driven planetary head with wear compensation of the brush Load measuring sensors for motor monitoring Size recognition of parts optional Applications: Deburring and brushing of sintered parts, burr removal on fine blankings and punched parts, in combination with grinding and deburring for laser cut parts, microfinish and superfinishing of the surface with special disks, lapping operation, removing of tool marks, polishing after turning, edge rounding after diskus grinding - double disk grinding, satin finishing, cleaning and degreasing, descaling, brush deburring of automotive components, milling effect with rough grinding discs Workpiece and parts: Sinter metal parts, fine blankings, punched parts, laser cut parts, precision surfaces, sealing surfaces, engine components, plates, flat parts, textile parts, clutch plates, stampings Photos of 2, 3 and 4 Station deburring systems Versions with extended load and unload conveyors. Automatic part turning systems and return conveyors. Detail photo of a 3 station system with planetary deburring head and 4 brushes each head. New design concept to seperate the wet operation area to the dry adjustment area where all the sensors and servo axes are mounted Deburring and edge rounding process with brushes automatic compensation system by sensors and load control part counter and brush logic which suites the changing characteristics as the brush lenght is reduced. Loeser is prepared for any handling between machines used in automatic production cells. Planetary head and deburring tools The head is equipped with 4 brushes which are mounted on one rotating disk. This disk rotation can be independant frequency controlled rotate. Also the rotation direction can be set by the operator. The brushes are controlled by a different drive and also frequency controlled. Powerfull motors allow heavy removal rates and high finishing speeds. Special bearings with tight tolerances suit for perfect for precision components used in the automotive industry. The machines can be configured with multiple heads which than run in different directions to get a perfect result for 360° burr free holes on workpieces. Compensation systems are used on automatic lines and available for Siemens and Allen Bradley controls. 4 individual operations are possible on the planetary head: - 1. Brush head rotation left and individual brush rotation left - 2. Brush head rotation left and individual brush rotation right - 3. Brush head rotation right and individual brush rotation left - 4. Brush head rotation right and individual brush rotation right